JointFil

Cracks and joints should be cleaned of any dirt and loose particles. A base adhesion coat of PR 100A/B (2:1 mixing ratio by weight) is applied on all sides of the cracks and allowed to set for 15 minutes. Protecto-Jointfil 100 and 200 are mixed together in the ratio of 100:45 by weight and poured directly into the cracks or joints. Remove any surface bubbles by smoothening the surface with a finger dipped in kerosene. Allow the material to cure for 24 hours before moving heavy traffic over it. CONSUMPTION: One kg of Protecto-Jointfil 100/200 mixture fills up 945 cm3. (approximately)

PROPERTIES:

Mixing Ratio Pot Life Tack Free Time Tensile Strength IS 2508-1984 Elongation IS 2508 -1984 Flexibility 1 kg Protecto-Jointfil 100 + 0.45 kg Protecto-Jointfil 200 15-20 min. at 30oC 3 - 5 hours 40 -50 kg /sq.cm 300% Excellent